9
Spider8
Conversions and modifications
The Spider8 must not be modified from the design or safety
engineering point of view without our express agreement. Any
modification shall exclude all liability on our part for any damage
resulting therefrom.
In particular, all repairs and soldering work on motherboards are
prohibited. When exchanging any modules, only original HBM parts
must be used.
Qualified personnel
This instrument is only to be installed and used by qualified
personnel strictly in accordance with the technical data and with the
safety rules and regulations which follow. It is also essential to
observe the appropriate legal and safety regulations for the
application concerned during use. The same applies to the use of
accessories.
Qualified personnel means persons entrusted with the mounting,
assembly, commissioning and operation of the product who possess
the appropriate qualifications for their function.
Maintenance and repair work on an open device with the power on
should only be undertaken by trained personnel who are aware of
the above-mentioned dangers.
To Next Page
Loading...
