Add
Remove
File Edit Device
E-18
Configuring the Spider8 with the Setup program Ý Description of the setup dialogue
Spider8
Undo All Settings:
• The changes you have made since starting the program are
cancelled. The pre-existing parameters are valid once again.
Select All Channels:
• All connected channels are made active. A 3 is displayed in the
”Mark” column
3 .
Deselect All Channels:
• All channels selected with 3 are deselected. The tick
disappears.
Add/remove device (in offline mode only):
• You can predefine one or more Spider 8 devices (max. 6)
(Add/remove device).
Undo All Settings
Select All Channels
Deselect All Channels
File Edit
To Next Page
Loading...
