E-17
Configuring the Spider8 with the Setup program Ý Description of the setup dialogue
Spider8
You can save in one of two ways:
Save Setup:
• The current setting is stored as a file.
• If the settings are being saved for the first time, you must enter a
name and select the required directory. You can save in one of
two ways:
1. Save as a binary file: extension sp8
2. Save as a text file: extension txt (ASCII)
Settings stored as a text file cannot be retrieved and loaded again.
Binary files can be recalled under this name (Load Setup). This file
will be overwritten on the next Save without an acknowledgement
message.
Save Setup As:
If you want to save settings that have already been saved, but
under a new name, then select the ”Save Setup As ” menu item.
Print Setup:
• The settings are printed out on a default printer.
Quit:
• You exit the setup program.
The current device configuration is saved to a setup file.
Starting in offline mode:
This file will be loaded automatically next time the setup program is
started in offline mode. The setting that is valid on quitting setup is
restored.
Starting in online mode:
The current Spider8 configuration is recalled.
To Next Page
Loading...
