E-35
Configuring the Spider8 with the Setup program Ý Device-specific menus
Spider8
If you change the sampling rate, what effects does this have on
the filter frequency?
1. If possible, the filter frequency selected during set-up is used.
2. If this is not possible, the filter frequency is modified by as little
as possible when compared with the frequency last used (see
fields in table on previous page).
Example: Selected frequency 150Hz
Change in sampling rate:
Sampling Rate Selected filter
25 /s 2.5Hz
800 / s 10Hz
1200 /s 20Hz
To Next Page
Loading...
