14
(4.3.2) Signal Path
The signal path is the direction that the audio signal follows from
your guitar, through your 14 available blocks, and ends at the outputs
of HeadRush Prime. You can easily reconfigure your signal path to
best suit your needs, especially when it comes to creating more
complex rigs.
To reconfigure the signal path, tap the arrow next
to the signal path button, located at the bottom of
the Main screen. An overlay with your available
signal chain routings will appear.
The following signal path options are available:
Guitar: Straight Path
This straight signal path is the default and the most common
for users that are creating non-complex guitar tones.
Guitar: Middle Split
This signal path splits in the middle and rejoins near the end.
This configuration is useful for using two types of effects (or
chains of effects) but want to keep their signals separate.
See (4.4.2) Adjusting Settings > Parameters > Mix to learn
how to mix the split paths together.
Guitar: Immediate Split
This signal path splits immediately from the source and
rejoins near the end. Like the second configuration, this one
is useful for using two types of effects (or chains of effects)
independently, but it allows for more models in the split
paths and the rejoined one.
See (4.4.2) Adjusting Settings > Parameters > Mix to learn
how to mix the split paths together.
To Next Page
Loading...
