HEADRUSH PRIME - 4.5 Footswitch Modes

25
(4.5) Footswitch Modes
The eight middle footswitches can be used to activate or bypass blocks (amps, impulse responses, clones, cabs,
or effects) as well as select rigs, setlists, and songs. The footswitches can be used in one of five modes: Stomp
Mode, Rig Mode, Hybrid Mode, Setlist Mode, or Song Mode. The mode you are in when you power off HeadRush
Prime will be the mode you are in when you power it back on.
To change the mode:
1. Press and hold the top-right footswitch
until the available modes appears on the
bottom row of footswitches. The adjacent
five footswitches now correspond to the
five modes: Stomp, Rig, Hybrid, Setlist,
and Song.
2. Press a footswitch to enter the
corresponding mode.
(4.5.1) Stomp Mode
In Stomp Mode, the middle eight footswitches
correspond to blocks (amps, cabs, IRs, clones,
or effects) in your rig. Press a footswitch to
activate or deactivate its block.
To show the previous or next rig, press the
upper-left (Rig ) or lower-left (Rig )
footswitch.
(4.5.2) Rig Mode
In Rig Mode, the middle eight footswitches
correspond to rigs you have saved. Press a
footswitch to load its rig.
To show the previous or next four rigs, press
the upper-left (Bank ) or lower-left (Bank
) footswitch.
Rig  Block 1 Block 2 Block 3 Block 4 Looper
Rig  Block 5 Block 6 Block 7 Block 8
Tuner
Bank  Rig 1 Rig 2 Rig 3 Rig 4 Looper
Bank  Rig 5 Rig 6 Rig 7 Rig 8
Tuner
Exit Stomp Rig Hybrid Setlist
Song