heat-timer ETS-LT - Schedule Day, Start Time, and Temperature Settings

059327–00 REV. C
HEAT-TIMER CORP.
|
35
05 STARTUP
SELECT DAYS
Selections: Weekdays, Weekends, Everyday, or specific days
Menu Path: /Schedules > Temp. Schedules > Select Day
Description:
Select the days or group of days (weekends, weekdays, or
everyday) to apply the schedule.
SET SCHEDULE START TIME
Selections: Numerical values for Time
Menu Path: /Schedules > Temp. Schedules > Select Days >
Set SCH-1 Start Time
Description:
Specifies the schedule start time. Four Schedule Start Times
can be set for each day. Each start time has its own temperature setting
(See “Set Schedule Temperature” on page 35).
SET SCHEDULE TEMPERATURE
Selections: 40°F/4.5°C to 200°F/93°C Default: 0°F/-18°C
Menu Path: /Schedules > Temp. Schedules > Select Days >
Set SCH-1 Start Time > Set SCH-1 Override
Description:
The the Temp. setting overrides the Setpoint and sets the
system temperature to the entered value. The new Schedule Setpoint
temperature is displayed on the screen with an asterisk (for example,
130F*). All Temp. settings for each day of the week must be set to
guarantee that the default setting is replaced
- MINIMUM RUNTIME -
2 min
[ ]
BACK ▲▼ SAVE
- STAGE SETTINGS -
Reaction Time 2min
Minimum Runtime 2min
BACK ▲▼ SAVE
-- REATION TIME --
2 min
[ ]
BACK ▲▼ SAVE
- MINIMUM RUNTIME -
2 min
[ ]
BACK ▲▼ SAVE
- STAGE SETTINGS -
Reaction Time 2min
Minimum Runtime 2min
BACK ▲▼ SAVE
-- REATION TIME --
2 min
[ ]
BACK ▲▼ SAVE
- MINIMUM RUNTIME -
2 min
[ ]
BACK ▲▼ SAVE
- STAGE SETTINGS -
Reaction Time 2min
Minimum Runtime 2min
BACK ▲▼ SAVE
-- REATION TIME --
2 min
[ ]
BACK ▲▼ SAVE