Graphic simulation | 3-D simulation
7
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
555
3-D zoom
The zoom function enables you to show workpiece blanks and
finished parts in various perspectives.
Activating the 3-D zoom:
Press the 3-D zoom soft key
You can rotate the 3-D simulation by using the menu
items and the mouse.
Further information: "Rotating the 3-D view with the
menu functions", Page 542
Further information: "Rotating and moving the 3-D
view with the mouse", Page 543
If the cutting edge collides with the workpiece during
rapid traverse, the sectional planes are displayed in red.
Soft keys for the 3-D zoom
Rotate holes or milling contours to the left
Rotate holes or milling contours to the right
Display a section view
Select the side view. Rotate the side view
by 90°
Select the perspective view
To Next Page
Loading...
