Fundamentals | Control model, software and features
HEIDENHAIN | TNC 320 | ISO Programming User's Manual | 10/2017
13
New functions 77185x-01
New special operating mode RETRACT, see "Retraction after a
power interruption", page 610
New graphic simulation, see "Graphics ", page 586
New Tool usage file MOD function in the machine settings
group, see "Tool usage file", page 631
New Set system time MOD function in the systems settings
group, see "Set the system time", page 632
New Graphic settings MOD group, see "Graphic settings",
page 626
With the new cutting data calculator you can calculate the
spindle speed and the feed rate, see "Cutting data calculator",
page 184
With the jump commands new if/then decisions have been
introduced, see "Programming if-then decisions", page 349
The character set of machining Cycle 225 Engraving has been
expanded to include more characters and the diameter sign,
see Cycle Programming User's Manual
New machining Cycle 275 Trochoidal Milling,
see Cycle Programming User's Manual
New Cycle 233 Face Milling,
see Cycle Programming User's Manual
In the drilling cycles 200, 203 and 205 the parameter Q395
DEPTH REFERENCE has been introduced in order to evaluate
the T ANGLE, see Cycle Programming User's Manual
Probing Cycle 4 MEASURING IN 3-D has been introduced,
see Cycle Programming User's Manual
To Next Page
Loading...
