HEIDENHAIN TNC 320 - Data transfer to or from an external data carrier

Fundamentals, File Management | Working with the file manager
3
168
HEIDENHAIN | TNC 320 | ISO Programming User's Manual | 10/2017
Data transfer to or from an external data carrier
Before you can transfer data to an external data
medium, you must set up the data interface.
Further information: "Setting up data interfaces",
page 637
To call the file manager, press the PGM MGT key.
Select the screen layout for data transfer: press
the WINDOW soft key.
Use the arrow keys to move the cursor to the file you wish to
transfer:
Moves the cursor up and down within a window
Moves the cursor from the right to the left
window, and vice versa