Fundamentals | Control model, software and features
HEIDENHAIN | TNC 320 | ISO Programming User's Manual | 10/2017
25
New functions 77185x-05
CONTOUR DEF can now also be programmed in ISO format see
"Functions for contour and point machining menu", page 449
The PLANE functions can now also be programmed in ISO
format with FMAX and FAUTO, see "Specifying the positioning
behavior of the PLANE function", page 498
If a pallet table is selected in a Program Run operating mode,
the Tooling list and T usage order are calculated for the
entire pallet table, see "Tool management (option number 93)",
page 233
New FUNCTION COUNT function for controlling a counter, see
"Defining a counter", page 457
New FUNCTION LIFTOFF function for retracting the tool from
the contour upon an NC stop, see "Lift off tool at NC stop:
FUNCTION LIFTOFF", page 474
You can also open the tool-carrier files in the file management,
see "Tool carrier management", page 451
With the ADAPT NC PGM / TABLE function, you can also import
and modify freely definable tables, see "Importing tool tables",
page 216
The machine tool builder can define update rules that make it
possible, for example, to automatically remove umlauts from
tables and NC programs when importing a table, see "Importing
tool tables", page 216
A quick search for the tool name is possible in the tool table,
see "Entering tool data into the table", page 208
It is possible to comment out NC blocks, see "Commenting out
an existing NC block", page 176
The machine tool builder can disable the setting of presets in
individual axes, see "Saving presets in the table", page 531,
see "Presetting with a 3-D touch probe ", page 562
Line 0 of the preset table can also be edited manually, see
"Saving presets in the table", page 531
The CAD viewer exports points with FMAX to an H file, see
"Selecting the file type", page 310
When multiple instances of the CAD viewer are open, they are
shown somewhat smaller on the third desktop.
The CAD viewer now enables you to extract data from STEP,
IGES and STEP files, see "Data Transfer from CAD Files",
page 295
The nodes in all tree structures can be expanded and collapsed
by double-clicking them.
New icon in the status display for mirrored machining, see
"General status display", page 84
Graphic settings in the Test Run operating mode are
permanently stored, see "3-D view in the Test Run operating
mode", page 590
In the Test Run operating mode, you can now choose between
various traverse ranges, see "Application", page 596
The tool data of touch probes can also be displayed and
entered in the tool management (option 93), see "Editing tool
management", page 235
To Next Page
Loading...
