HEIDENHAIN TNC 320 - Page 661

Tables and Overviews | Machine-specific user parameters
17
HEIDENHAIN | TNC 320 | ISO Programming User's Manual | 10/2017
661
Parameter settings
False: Display soft key preset table
Font size with program display
FONT_APPLICATION_SMALL
FONT_APPLICATION_MEDIUM
Sequence of icons in the display
[0] to [9]
Depends on activated options
DisplaySettings
Display step for individual axes
List of all available axes
Display step for position display in mm or degrees
0.1
0.05
0.01
0.005
0.001
0.0005
0.0001
Display step for position display in inches
0.005
0.001
0.0005
0.0001
DisplaySettings
Definition of unit of measure valid for the display
metric: Use metric system
inch: Use inch system
DisplaySettings
Format of NC programs and display of cycles
Program input in HEIDENHAIN Klartext conversational text or in DIN/ISO
HEIDENHAIN: Program input in operating mode MDI in Klartext conversational text
dialog
ISO: Program input in Positioning with MDI mode of operation in DIN/ISO