1 GENERAL
1.1 MANUFACTURER / SUPPLIER
Manufacturer:
Heras B.V.
Hekdam 1, 5688 JE Oirschot
Netherlands
Tel.: +31(0)499-551225
www.heras.com
Technical Construction File Heras B.V. manager, R&D Department
1.2 SERVICE / MAINTENANCE
In the event of problems, failures or questions you can contact:
* local rate
Only available from the Netherlands. If you are located elsewhere, please contact your dealer for
assistance.
1.3 TYPE
The HMD230 is intended for the following types of Heras sliding gate:
uGate
Delta
SHB
Orion
The HMD230 is available in 2 versions:
HMD230S [Standard]
HMD230A [Advanced]
The IGD is intended for the Heras iGate
The IGD is available in 2 versions:
IGDP [Premium]
IGDE [Excellent]
See the chapter on "
TECHNICAL DATA" for the technical specifications.
1.4 HOW TO USE THIS MANUAL
Carefully read this User Manual before using the sliding gate and save it for future reference.
This description was made for the people who operate the gate. Fitters use a separate installation
manual.
There is also a separate installation diagram for fitters to install the drive in question in compliance
with the applicable norms and standards. If any faults occur, consult a Heras-certified engineer.
To Next Page
Loading...