14 DECOMMISSIONING AND REMOVAL
At the end of their service lives the products must be disposed of in accordance with all local, regional
and national rules and instructions. The sliding part is mainly made of aluminum parts. The
guideposts are made of steel.
Heras is also happy to take the products back and then dispose of them in an appropriate manner.
The Delta, uGate and iGate gates have highly tensioned cables fitted in the bottom rail. If
these cables are cut, they can snap with great force. This can lead to serious injury.
Therefore, it is prohibited to disassemble the bottom rail yourself.
!! Only people trained by Heras are allowed to disassemble the
bottom rail.
There is no hidden danger associated with dismantling the bars, top rail and stiles.
The points that are fitted to some sliding gates are sharp. There is a danger of being cut when
disassembling such a gate. Wear suitable gloves.
The master drive is fitted with a battery of the type CR 2032.
Disposing of batteries as domestic waste is not allowed. Spent batteries can be handed in for free at
the public municipal collection facilities and at all points of sale where batteries are sold. You can also
return any batteries bought from us to us after use. In this way you will be making an important
contribution to conserving the environment!
15 SPARE PARTS
Use a CR 2032 button battery to replace the battery (see illustration 13 pos. 5) of the integrated
clock.
To Next Page
Loading...