HERO XPULSE 200 PROGRAMMED FI - Bluetooth Connectivity Setup

25
Bluetooth:
Your vehicle is equipped with bluetooth
connectivity feature by which you can pair
your smartphone with the meter console of
your XPULSE 200 PROGRAMMED FI
vehicle through Hero navigation application.
To connect your device proceed as follows:
•
Turn the ignition switch “ON”.
•
Open hero navigation application (1) on
your smartphone.
•
For first time pairing, allow the application
to access:
1
(1) Hero navigation application
NOTE
NOTE
•
Compatibility and performance of hero ride
guide application may very based on your
device and software version.
•
Application needs GPS signal, internet and
bluetooth connectivity to perform the
desired navigation functionality.
c. Contacts
e. Phone call logs on your device
d. Make & manage phone calls
b. Photos, media, files
a. Device’s location if GPS is not enabled in
your device
•
Now select “GET STARTED” (2) to
proceed.
•
Application also asks you to accept (3) the
terms of use to proceed.
ALLOW
c
d
e
ALLOW
a
b