39
NOTE
•
To start the engine if any gear is engaged,
press the clutch lever and press the starter
switch.
•
Do not open the throttle during starting the
vehicle.
Help assure your vehicle's future reliability and
performance by paying extra attention to how
you ride during the first 500 km.
During this period, avoid full-throttle starts
and rapid acceleration.
Running in
WARNING
!!
Never run the engine in a closed area, the
exhaust contains poisonous gases.
•
Slowly release the clutch lever and at the
same time, gradually increase engine speed
by opening the throttle. Coordination of the
throttle and clutch lever will assure a smooth
positive start.
•
When the vehicle attains a moderate speed,
close the throttle, press the clutch lever and
nd
shift to 2 gear by placing the toe on the
underside of gear pedal and lift upwards.
•
This sequence is repeated progressively to
rd
th
th
shift to 3 , 4 and 5 gear.
•
After the engine has been warmed up, the
vehicle is ready for riding.
•
While the engine is idling, press the clutch
lever and depress the gearshift pedal
st
downwards using the toe to shift into 1
gear.
RIDING
5
4
1
N
2
3
CAUTION
!!
Do not shift gears without operation of clutch
and without closing the throttle otherwise this
would lead to damage of gears.
BRAKING
•
To help provide vehicle stability.
The ABS system is self-regulating and
always active once vehicle speed exceeds
5 km/h.
Anti-lock braking system (ABS)
This model is equipped with Anti-lock braking
system (ABS). ABS enhances active safety by
helping to prevent the wheels from locking
under braking.
ABS is designed to meet two essential
requirements during every brake application:
•
To help maintain steering control and
manoeuvrability–on road surfaces.
•
The ABS computer acts on the basis of the
comparative speeds of the front wheel. The
use of non-approved tyres can affect the
To Next Page
Loading...
