EasyManua.ls Logo

HERO XPULSE 200 PROGRAMMED FI - Right Handlebar Controls

HERO XPULSE 200 PROGRAMMED FI
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
4. Clutch switch
There is a clutch switch (4) provided for the
safety of the rider. The vehicle cannot be
started by electric starter switch until the clutch
lever is operated when the vehicle is engaged
in gear.
3. Horn switch ( )
Press the switch to operate the horn (3).
(4) Clutch switch
4
1. Electric starter switch ( )
Right handlebar controls
Ensure starter switch ( ) is operated when the 1
vehicle transmission is in neutral. If the vehicle
is engaged in gear, press the clutch lever
before operating the starter switch. Release
starter switch after the engine has started.
Never hold electric starter switch continuously
more than 5 seconds as continuous cranking
of engine will discharge the battery.
CAUTION
!!
(1) Electric starter switch
1
2. Engine stop/kill switch
The engine stop/kill switch (2) is provided
next to throttle grip. The switch has two
positions. In “ON” ( )position, engine will
operate and in OFF” ( ) position, engine will
not operate. The prime function of switch is to
stop the engine during emergency (Vehicle tip
over, throttle cable stuck etc.).
(2) Engine stop/kill switch
2

Related product manuals