EasyManua.ls Logo

HERO XPULSE 200 PROGRAMMED FI - Air Cleaner Element Cleaning

HERO XPULSE 200 PROGRAMMED FI
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
53
(7) Air cleaner element (8) Air cleaner housing
8
7
CAUTION
!!
Replace it earlier if it becomes very dirty,
damaged on surface or on the sealing area.
Never wash the air cleaner element. Only
blow air in the air cleaner element for
cleaning dust, as explained. Replace air
cleaner element once in every 12000 km.
Install the seat ).(page 35
Install the air cleaner cover.
Remove the drain tube (1) and drain the
deposit into a container.
Install the air cleaner element.
Install the right side cover.
Air cleaner drain tube cleaning
Follow the above process more frequently
when riding in rain or at full throttle.
NOTE
Always ensure to reinstall the drain tube after
draining the deposit.
6
(5) Air cleaner cover screws
(6) Air cleaner cover
5
Air cleaner element cleaning
Clean the element by tapping it gently to
loosen dust.
Blow away the remaining dust by forcing
compressed moisture-free air using an air
nozzle (9) from the housing side (10) of
the air cleaner.
Replace the air cleaner element if it is
excessively dirty, torn or damaged.
9
10
(9) Air nozzle (10) Housing side

Related product manuals