Hex ezCAN for CAN-bus-equipped Motorcycles
_________________________________________________________________________________________________
_________________________________________________________________________________________________
© Hex Innovate (UK) Ltd. Page 17 of 60 ezCAN 2408.x
8. Click the verification link in the body of the E-mail.
Registration is now complete, and support and warranty
cover are active for your ezCAN.
3.5.2 Re-registering the ezCAN
If you need to change your ezCAN registration details, or if you have
purchased a used ezCAN and want to register it in your name, do the
steps that follow:
1. Click the Extra Settings button in the upper right corner of the
ezCAN configuration software (below).
2. Click the About option in the drop-down menu.
The ezCAN Version details dialogue will be shown.
3. Click the Update Registration Details button.
The ezCAN Registration dialogue will be shown.
4. Complete the ezCAN Registration dialogue as shown in
Registering the ezCAN.
3.5.3 Registering manually
If for any reason you cannot register using the ezCAN Registration
dialogue, register manually by going to this page and filling in your details.
IMPORTANT
It may take several minutes to receive the verification E-
mail. If you do not receive the verification E-mail after this
time, check your E-mail account’s anti-spam settings and
Spam folder. The verification E-mail has the following
delivery address and subject line:
From: noreply-signup@hexcode.co.za
Subject: ezCAN Registration
If you have not received the verification E-mail after one
hour, contact support@hexezcan.com for help.
To Next Page
Loading...
