HEX ezCAN - Ducati

Hex ezCAN for CAN-bus-equipped Motorcycles
_________________________________________________________________________________________________
_________________________________________________________________________________________________
© Hex Innovate (UK) Ltd. Page 38 of 60 ezCAN 2408.x
 Norden 901 (2022+)
 Norden 901 Explorer (2023+)
The Norden 901 is based on the KTM 890 electronic platform, and is
subject to the same ezCAN functionality limitations (click here for the list
of limitations). Therefore, the motorcycle’s factory controls cannot be used
to control the ezCAN.
5.1.7 Ducati
5.1.7.1 ezCAN II Como
Applicable models:
 DesertX (2022+)
 Multistrada V4 models (2021+)
If an ezCAN II Como is installed on a 2022-onward DesertX or a 2021-
onward Multistrada V4:
 The ezCAN is controlled using the +/RES and -/SET buttons (red
arrows) on the left-side handlebar controls (below).
DesertX
Multistrada V4
IMPORTANT
A dedicated Hex LIN button will be made available for the
ezCAN II Scandes in the near future.