HEX ezCAN - Ezcan Registration; Registering the Ezcan

To Next Page

To Previous Page

Hex ezCAN for CAN-bus-equipped Motorcycles

_________________________________________________________________________________________________

3.5 ezCAN registration

Note that ezCAN product support is only available to users who have

registered. The registration procedure allows ezCAN owners to access the

full benefits of ezCAN ownership.

3.5.1 Registering the ezCAN

To register your ezCAN, do the steps that follow:

1. Connect your computer to the internet.

2. Remove the rubber plug covering the ezCAN's Micro-USB port.

3. Connect the ezCAN to your computer.

4. Launch the ezCAN Configuration Tool from your computer.

 If this is not the first time your ezCAN is connected to the

internet, the ezCAN configuration software will be shown.

 If this is the first time your ezCAN is connected to the

internet, the ezCAN Registration dialogue will be shown.

5. If the ezCAN Registration dialogue is shown, follow the prompts.

 Your browser will show the Hex ezCAN Registration form.

6. Enter all needed information, including a valid E-mail address.

7. Click the Submit button.

 A verification E-mail will be sent to your E-mail address.

IMPORTANT

Registration brings these essential benefits:

 Support and warranty cover will be enabled for your

ezCAN.

 You will have access to the latest device firmware

updates.

 You can also choose to stay informed of the latest

software functionality. ezCAN functionality is

continually upgraded, and the ability to control

intelligent accessories is planned for ezCAN in

future.

Related product manuals