HIKVISION DeepinMind iDS-6700NXI-I/8F(B) Series User Manual

Network Video Recorder User Manual
29
Checks checkbox.
Play or pause video in Playback mode.
Advance video a single frame in single-frame Playback mode.
Stop/start auto switch in auto-switch mode.
13
PTZ
Enter PTZ Control mode.
14
ESC
Go back to previous screen.
N/A.
15
RESERVED
Reserved.
16
F1
Select all items on a list.
N/A.
Switch between play and reverse play in Playback mode.
17
PTZ Control
Adjust PTZ camera iris, focus, and zoom.
18
F2
Cycle through tab pages.
Switch between channels in Synchronous Playback mode.
Troubleshooting Remote Control:

Make sure you have installed batteries properly in the remote control. And you have to aim the
remote control at the IR receiver in the front panel.
If there is no response after you press any button on the remote, follow the procedure below to
troubleshoot.
Step 1 Go to System > General by operating the front control panel or the mouse.
Step 2 Check and remember device ID#. The default ID# is 255. This ID# is valid for all the IR remote
controls.
Step 3 Press the DEV button on the remote control.
Step 4 Enter the device ID# you set in step 2.
Step 5 Press the ENTER button on the remote.
If the Status indicator on the front panel turns blue, the remote control is operating properly. If
the Status indicator does not turn blue and there is still no response from the remote, please
check the following:

HIKVISION DeepinMind iDS-6700NXI-I/8F(B) Series Specifications

General

Brand	HIKVISION
Model	DeepinMind iDS-6700NXI-I/8F(B) Series
Category	Network Hardware
Language	English