Network Video Recorder User Manual
6
Product Key Features
General
● Connectable to network cameras, network dome and encoders.
● Connectable to the third-party network cameras like ACTI, Arecont, AXIS, Bosch, Brickcom,
Canon, PANASONIC, Pelco, SAMSUNG, SANYO, SONY, Vivotek and ZAVIO, and cameras that
adopt ONVIF protocol.
● Connectable to the smart IP cameras.
● H.265+/H.265/ H.264+/H.264/MPEG4 video formats
● PAL/NTSC adaptive video inputs.
● Each channel supports dual-stream.
● Up to 32 network cameras can be added according to different models.
● Independent configuration for each channel, including resolution, frame rate, bit rate, image
quality, etc.
● The quality of the input and output record is configurable.
Local Monitoring
● Provide HDMI/VGA1 and HDMI2/VGA2 outputs (except iDS-6716NXI-I/16S(B) series).
● HDMI Video output at up to 4K resolution (except iDS-6716NXI-I/16S(B) series).
● Multiple screen display in live view is supported, and the display sequence of channels is
adjustable.
● Live view screen can be switched in group. Manual switch and auto-switch are provided and
the auto-switch interval is configurable.
● 3D positioning.
● Configurable main stream and sub-stream for the live view.
● Quick setting menu is provided for live view.
● Motion detection, video tampering, video exception alert and video loss alert functions.
● Privacy mask.
● Multiple PTZ protocols supported; PTZ preset, patrol and pattern.
● Zooming in by clicking the mouse and PTZ tracing by dragging mouse.
HDD Management
● Up to 16 SATA hard disks and 1 eSATA disk can be connected.
● Up to 8 TB storage capacity for each disk supported.
● Supports 8 network disks (NAS/IP SAN disk).
● Supports S.M.A.R.T. and bad sector detection.
● HDD group management.
To Next Page
Loading...
Need help?
General
