Network Video Recorder User Manual
92
Refer to Chapter 7.1.2 Add the Network Disk for network HDD connections.
Step 1 Go to Storage > Recording Schedule.
Step 2 Select a camera.
Step 3 Check Enable Schedule.
Step 4 Select a Record Type. The record type can be Continuous, Motion Detection, Alarm, Motion |
Alarm, Motion & Alarm, and Event.
Different recording types are configurable.
● Continuous: scheduled recording.
● Event: recording triggered by all event triggered alarm.
● Motion: recording triggered by motion detection.
● Alarm: recording triggered by alarm.
● M/A: recording triggered by either motion detection or alarm.
● M&A: recording triggered by motion detection and alarm.
Step 5 Select a day and click-and-drag the mouse on the time bar to set the record schedule.
Figure 7-10 Record Schedule
Step 6 Repeat the above steps to schedule recording for other days in the week.
Step 7 Click Apply to save the settings.
To Next Page
Loading...
