Video Security Control Panel User Manual
10. Enter the receiver ID which is the authentication account while doing the communication with the alarm
receiving center.
11. Click Apply to save the settings.
This function varies depending on the models of the control panel.
Wireless Center Parameter Settings
Steps:
1. Enter the wireless center parameter settings page.
Remote Settings->Network->Wireless Center
2. Click the dropdown menu to select the net center.
3. Enter the device ID which is applying for displaying in the alarm receiving center.
The length of the username should be 6 characters.
Only numeric (0~9), and letter (A~F&a~f) are valid for this username.
To Next Page
Loading...
Need help?
General
