Video Security Control Panel User Manual
4. Enter the IP address which is used to communicate with the wireless alarm receiving center.
5. Enter the port NO. for communicating with the alarm receiving center.
6. Click the dropdown menu to select the protocol type.
7. Click Apply to save the settings.
Advanced Network Parameters Settings
Steps:
1. Enter the advanced network configuration page.
Remote Settings->Network->Advanced
2. Enter the corresponding DNS sever address.
3. Enter the IP address and port NO. of the control panel.
4. Click Apply to save the settings.
Whitelist Settings
Purpose:
The whitelist is the list of phone numbers which are authorized to interact with the control panel.
To Next Page
Loading...
Need help?
General
