Video Security Control Panel User Manual
2. Click dropdown menu to select a Zone needs to be configured.
3. Select a tampering type.
4. Check the Upload Alarm Recovery Report checkbox to enable the function of uploading alarm recovery
report.
5. Select the linked siren on the Linked Siren panel.
6. Select the linked trigger on the Linked Trigger panel.
7. Click Copy to to copy all these settings to other Zones.
8. Click Apply to save the settings.
Remote Control Permission Settings
Steps:
1. Enter the remote control permission configuration interface.
Remote Settings->Alarm->Remote Control Permission
To Next Page
Loading...
Need help?
General
