Video Security Control Panel User Manual
{4} Keypad No.
{5} End the command.
There are three mode to add/delete zones for the partition , adding/deleting separately, adding/ deleting
continually and adding/deleting in batch, for details, refer to the Partition Keypad User Settings.
Partition Time and Control Panel Duress Report Settings
To configure the system time and control panel duress report, please see the command below.
531 5 1 3 2 0 #
1 2
4
63 5
7
{1} System Time and Control Panel Duress Report Programming Address: 531
{2} Classification Option of System Time and Control Panel Duress Report: 5
{3} Entering Delay
{4} Exiting Delay
To Next Page
Loading...
