User Manual of WIFI Network Video Recorder
103
c) Input the Alarm Name and set the Dwell Time.
If Manually Clear is selected for Dwell Time, it only be cleared in Menu > Manual > Alarm.
Figure 8. 14 Alarm Output Setup Interface
d) Set the Arming Schedule.
i. Click the button after Settings.
ii. Choose one day of a Week. Up to 8 periods can be set within each day.
Time periods shall not be repeated or overlapped.
Figure 8. 15 Set Arming Schedule of Alarm Output
iii. Repeat the above steps to configure arming schedule for other days. You can also click Copy to
copy the arming schedule to other days.
iv. Click the OK button to save the settings and back to Alarm Output interface.
e) Optionally, click Copy to copy the above settings to other alarm outputs.
To Next Page
Loading...
