44
Figure 5. Export Successful Screen
Note:
Video Player software will automatically be copied on to the device that the recorded files were exported on.
Export Video Clips
You may also select video clips to export directly in Playback status. A maximum of 30 clips can be selected for each
channel.
To export video clips during Playback:
• By Using the Mouse:
1. Enter the Playback interface (See Video Playback).
2. Click the Clip Start/Stop button on the Playback Control Panel, and select the start and end of the
video clip during playback.
3. Repeat for additional clips.
4. Click the Quit Playback button to exit from the Playback interface. You’ll then be prompted to save
the clips, as shown in Figure 6.
Figure 6. Video Clips Saving Prompt
5. Click the Yes button to enter Backup interface or select No to exit Playback interface.
6. At the Backup interface, select the Start button to begin the Backup process.
• By Using the Front Panel / Remote:
1. Enter the Playback interface (See Video Playback).
2. During playback, press the EDIT button to mark start of clip.
3. Press the EDIT button again to mark end of clip.
4. Repeat for additional clips.
5. Press the ESC button to exit from the Playback interface. You’ll then be prompted to save the clips,
as shown in Figure 6.
To Next Page
Loading...
Need help?
General