HIKVISION DS-7604 Series User Manual

65
Navigate PTZ Menu
PTZ menus can be navigated through with either the mouse or the front panel/remote. For quick access to certain PTZ
settings, right clicking with the mouse in a display while in PTZ control mode will bring up the PTZ settings menu.
This menu is shown in Figure 1.
Figure 1. Mouse PTZ Settings Menu
The items that can be found on this menu include:
• Camera: Select a PTZ camera.
• Call Preset: Call a PTZ preset.
• Call Patrol: Call a PTZ sequence.
• Call Pattern: Call a PTZ pattern.
• Patrol Setting: Enter PTZ sequence configuration menu.
• Pattern Setting: Enter PTZ pattern configuration menu.
• PTZ Setting: Enter PTZ setting menu.
Configure PTZ Settings
Settings for a PTZ camera must be configured before it is used. Before proceeding, verify that the PTZ and RS-485 of
the DVR are connected properly.
To configure PTZ settings:
1. Click Menu > Setting > PTZ to enter the PTZ Settings menu, shown in Figure 2.

HIKVISION DS-7604 Series Specifications

General

Brand	HIKVISION
Model	DS-7604 Series
Category	DVR
Language	English