88
Figure 5. Add User Menu
2. Enter information for new user, including User Name, Password, Level and User’s MAC.
3. The Level is the user level and is separated into two tiers.
• Operator: The Operator user level has the authority to configure two-way audio in network settings
and all parameters in channel settings.
• Guest: The Guest user can not configure network settings, but can configure the local playback as
well as the remote playing in channel settings.
4. If User’s MAC is configured and enabled, the user may only access the DVR from that particular
MAC address.
5. Select the Permission button to enter the Permission Settings menu, shown in Figure 6.
Figure 6. Permission Settings Menu
6. Configure permission for local settings under Local Permission tab. The local settings include:
• Local Log Search: Search and view logs of DVR.
• Local Configuration: Configure and restore parameters to factory defaults. Introduce settings to or
export settings from DVR.
• Local Camera Management: Enable and disable analog channels. Ability to add and delete IP
cameras
• Local Advanced Management: HDD management (including the initialization and changing the
properties of a disk). Ability to update system firmware as well as to stop the relay output
• Local Shutdown/Reboot: Shutdown or reboot the DVR.
7. Click on Network Permission tab to configure network permission settings, as shown in Figure 7.
The network settings include:
To Next Page
Loading...
Need help?
General