Steps
Note
Only certain video recorder models support this funcon.
1. Add Wi-Fi cameras to the device through wireless network. Refer to
Add Wi-Fi Camera for
details.
2. Go to
Conguraon → Camera → IP Camera .
Figure 5-7 Congure Camera as Repeater
3. Turn on the switch(s) in Auto Repeater of Wi-Fi camera(s) as your desire.
Note
●
The repeater camera and repeated camera shall both enable this funcon.
●
Only two layers are allowed for the topology.
4. Oponal: Click Enable Repeater or Disable Repeater to enable or disable the repeater funcon
of all cameras.
Add Network Camera by Device Password
Add network cameras which the password is the same as your video recorder.
Before You Start
●
Ensure your network camera is on the same network segment with your video recorder.
●
Ensure the network connecon is valid and correct. Refer to General for details.
●
Ensure the network camera password is the same as your video recorder.
Steps
1. Go to
Conguraon → Camera → IP Camera . The online cameras on the same network
segment with your video recorder are displayed in Online Device List.
Figure 5-8 IP Camera Management Interface
2. Select a desired network camera.
3. Click to add the camera.
Network Video Recorder User Manual
24