HIKVISION DS-7608NI-L1/W

Note
You can set one PTZ type only for the linkage acon each me.
Congure Audio and Light Alarm Linkage
For certain network cameras, you can set the alarm linkage acon as audio alarm or light alarm.
Before You Start
●
Ensure your camera supports audio and light alarm linkage.
●
Ensure the audio output and volume are properly
congured.
Steps
1. Click Linkage Acon.
2. Select audio or light as your desire.
3. Click Apply.
Note
If you require to set audio and light parameters, please log into the network camera via web
browser to congure them.
6.5 Recording Management
6.5.1 Congure Recording Schedule
Video recorder will automacally start/stop recording according to the congured schedule.
Congure
Connuous Recording
Steps
1. Go to Conguraon → Record → Parameter .
2. Set the connuous main stream/sub-stream recording parameters for the camera.
3. Go to
Conguraon → Record → Schedule .
4. Select recording type as Connuous.
Congure
Event Recording
You can congure the recording triggered by the normal event or smart event.
Steps
1. Go to Conguraon → Event .
Network Video Recorder User Manual
70