Network Video Recorder User Manual
76
4. Set up arming schedule of the channel.
1) Select Arming Schedule tab to set the arming schedule of handling actions for the motion
detection.
2) Choose one day of a week and up to eight time periods can be set within each day.
3) Click Apply to save the settings.
Note
Time periods shall not be repeated or overlapped.
Figure 7-3 Set Arming Schedule of Motion Detection
5. Click Handling to set up alarm response actions of motion alarm.
6. If you want to set motion detection for another channel, repeat the above steps or just click
Copy in the Motion Detection interface to copy the above settings to it.
7.2 Set Sensor Alarms
Set the handling action of an external sensor alarm.
Steps
1. Go to Menu → Configuration → Alarm and select an alarm input..
To Next Page
Loading...
Need help?
General
