6.2.7 Hik-Connect
Go to Conguraon → Network → Plaorm Access . Refer to Hik-Connect for details.
6.2.8 Email
Go to Conguraon → Network → Email . Refer to Email for details.
6.3 Camera Management
6.3.1 Network Camera
Add Network Camera Through Wi-Fi
Add Wi-Fi Camera
You can use Wi-Fi match funcon to search Wi-Fi cameras that are not acvated, and add them to
the device automacally. Select Wi-Fi Match from the right-click menu in live view mode, and the
device will search and add Wi-Fi cameras. The process will take about 2 minutes. The Wi-Fi camera
will use IP Camera
Acvaon Password as its password. (Refer to Acvate Your Device )
Note
●
It is recommended to keep the distance between Wi-Fi camera and device within 50 meters.
●
Only certain Wi-Fi camera models and versions support this funcon.
●
Ensure the Wi-Fi camera is powered on, not acvated, and has not been connected with other
devices via network cable.
●
In a kit, Wi-Fi camera will connect to the NVR automacally.
Congure Camera as Repeater
The connected Wi-Fi cameras can be set as repeaters to extend the wireless network connecon
distance.
Before You Start
●
Ensure your Wi-Fi cameras support this funcon.
●
Before installing Wi-Fi cameras, you have to
congure the repeater funcon rst.
Network Video Recorder User Manual
51