HIKVISION DS-7608NI-L1/W

Steps
1. Go to Conguraon → Event → Smart Event .
2. Select a thermal camera detecon event.
3. Set Camera.
4. Set the arming schedule. Refer to Congure Arming Schedule for details.
5. Set the linkage
acons. Refer to Congure Alarm Linkage Acon for details.
6. Click Apply.
6.4.3 Congure Arming Schedule
Steps
1. Click Arming Schedule.
2. Choose one day of a week and set the
me segment. Up to eight me periods can be set within
each day.
Note
Time periods shall not be repeated or overlapped.
Figure 6-21 Set Arming Schedule
3. Click Apply.
6.4.4
Congure Alarm Linkage Acon
Congure Alarm Pop-up Window
When an alarm is triggered, the local monitor displays in full screen the video image from the
alarming channel
congured for full screen monitoring. And when the alarm is triggered
simultaneously in several channels, you must congure the auto-switch dwell me.
Steps
1. Go to Conguraon → System → Live View → General .
2. Set the event output and dwell
me.
Alarm Pop-up Output
Network Video Recorder User Manual
67