Network Video Recorder User Manual
78
Figure 7-6 Set Arming Schedule of Alarm Input
Choose one day of a week and Max. eight time periods can be set within each day, and click
Apply to save the settings.
Note
Time periods shall not be repeated or overlapped.
Repeat the above steps to set up arming schedule of other days of a week. You can also use
Copy to copy an arming schedule to other days.
6. Select Linkage Action to set up alarm response actions of the alarm input.
7. Optional: Select PTZ Linking tab and set PTZ linkage of the alarm input.Set PTZ linking
parameters and click OK to complete the settings of the alarm input.
Note
Make sure the PTZ or speed dome connected supports PTZ linkage.
Figure 7-7 Set PTZ Linking of Alarm Input
To Next Page
Loading...
Need help?
General
