HIKVISION DS-7608NI-L1/W

6.5.2 Congure Recording Parameter
Steps
1. Go to
Conguraon → Record → Parameter to congure camera main stream and sub-stream
parameters.
2. Congure recording parameters.
Main Stream
Main stream refers to the primary stream that
aects data recorded to the hard disk drive
and will directly determine your video quality and image size. Comparing with the sub-
stream, the main stream provides a higher quality video with higher
resoluon and frame
rate.
Sub-Stream
Sub-stream is a second codec that runs alongside the mainstream. It allows you to reduce the
outgoing internet bandwidth without sacricing your direct recording quality. Sub-stream is
oen exclusively used by smartphone applicaons to view live video. Users with limited
internet speeds may benet most from this seng.
Frame Rate
Frame rate refers to how many frames are captured each second. A higher frame rate is
advantageous when there is movement in the video stream, as it maintains image quality
throughout.
Resoluon
Image resoluon is a measure of how much detail a digital image can hold: the greater the
resoluon, the greater the level of detail. Resoluon can be specied as the number of pixel-
columns (width) by the number of pixel-rows (height), for example, 1024 × 768.
Bitrate
The bit rate (in Kbit/s or Mbit/s) is oen referred to as speed, but actually denes the number
of
bits/me unit and not distance/me unit.
Enable H.264+/Enable H.265+
The H.264+/H.265+ mode helps to ensure the high video quality with a lowered bitrate. It can
eecvely reduce the need of bandwidth and HDD storage space.
3. Click Apply.
6.5.3 Storage Device
Inialize HDD
If it is the rst me you use your HDD, please inialize it aer it is installed.
Network Video Recorder User Manual
73