HIKVISION DS-7608NI-L1/W

Before You Start
Install at least an HDD to your video recorder.
Steps
1. Go to
Conguraon → Record → Storage .
2. Select an HDD.
3. Click Init.
Add Network Disk
You can add the allocated NAS or IP SAN disk to the video recorder, and use it as a network HDD.
Steps
1. Go to Conguraon → Record → Storage .
2. Click Add.
3. Set NetHDD.
4. Set Type as NAS or IPSAN.
5. Enter NetHDD IP address.
6. Click
to search the available disks.
Figure 6-25 Add NetHDD
7.
Select NAS disk from the list, or manually enter the directory in NetHDD Directory.
8. Click OK.
Note
Up to 8 TB storage capacity is allowed for each network disk.
Result
The added network disks will be displayed in the storage device list.
Network Video Recorder User Manual
74