Note
For the added IP cameras, the Security status shows the security level of the password of
camera: strong password, weak password and risk password.
1.2.5 Show the Password of Added IP Camera
For the admin login user account, you can check the checkbox of Show Password of IP Camera to
enable the show the passwords of the successfully added IP cameras in the list.
You must enter the admin password to confirm permission.
1.2.6 Edit the Connected IP Cameras and Configure Customized
Protocols
After the adding of the IP cameras, the basic information of the camera lists in the page, you can
configure the basic setting of the IP cameras.
Steps
1. Click to edit the parameters; you can edit the IP address, protocol and other parameters.
Figure 1-12 Edit the Parameters
Channel Port
If the connected device is an encoding device with multiple channels, you can choose the
To Next Page
Loading...
Need help?
General
