HIKVISION DS-7608NI-L1/W

3. Go to Linkage Acon interface of the alarm detecon.
4. Select Send Email as alarm linkage acon.
Congure Audio Alert
When an alarm is triggered, an audio le will be played as the linkage acon.
Steps
Note
This linkage acon is only available for certain events and models.
1. Check Audio Alert in Normal Linkage.
2. Click to set audio for each event.
3. Click OK.
Trigger Alarm Output
The alarm output can be triggered by the normal and smart events.
Steps
1. Go to Linkage
Acon interface of the alarm input or event detecon.
2. Click Trigger Alarm Output.
3. Select the alarm outputs to trigger.
4. Go to
Conguraon → Event → Normal Event → Alarm Output .
5. Select an alarm output item from the list. Refer to Alarm Output for details.
Congure
PTZ Linkage
Video recorder can trigger the PTZ acons (e.g., call preset/patrol/paern) when the alarm event,
or VCA detecon events occur.
Steps
1. Go to Linkage
Acon interface of the alarm input or VCA detecon.
2. Select PTZ Linkage.
3. Select the camera to perform the PTZ acons.
4. Select the preset/patrol/paern No. to call when the alarm events occur.
Figure 6-22 PTZ Linkage
Network Video Recorder User Manual
69