To Next Page

To Previous Page

Import Devices in a Batch

You can add mulple devices to the client in a batch by entering the device parameters in a pre-

dened

CSV le.

Steps

1. Enter the Device Management module.

2. Click Device tab on the top of the right panel.

3. Click Add to open the Add window, and then select Batch Import as the adding mode.

4. Click Export Template and then save the

pre-dened template (CSV le) on your PC.

5. Open the exported template le and enter the required informaon of the devices to be added

on the corresponding column.

Note

For detailed descripon of the required elds, refer to the introducons in the template.

Adding Mode

Enter 0 or 1 or 2.

Address

Edit the address of the device.

Port

Enter the device port number. The default port number is 8000.

User Name

Enter the device user name. By default, the user name is admin.

Password

Enter the device password.

Cauon

The password strength of the device can be automacally checked. We highly recommend

you change the password of your own choosing (using a minimum of 8 characters, including

at least three kinds of following categories: upper case leers, lower case leers, numbers,

and special characters) in order to increase the security of your product. And we recommend

you change your password regularly, especially in the high security system, changing the

password monthly or weekly can

beer protect your product.

Proper conguraon of all passwords and other security sengs is the responsibility of the

installer and/or end-user.

Import to Group

Enter 1 to create a group by the device name. All the channels of the device will be imported

to the corresponding group by default. Enter 0 to disable this

funcon.

6. Click and select the template le.

DS-K1T341B Series Face Recognion Terminal User Manual

HIKVISION DS-K1T341B Series User Manual

Questions and Answers: