HIKVISION DS-K1T341B Series

Note
• You can also change the
sengs in System Sengs.
• If you install the device indoors near the window or the face recognion funcon is not
working well, select Others.
• If you do not
congure the applicaon mode and tap Next, the system will select Indoor by
default.
• If you
acvate the device via other tools remotely, the system will select Indoor as the
applicaon mode by default.
6.2 Set Administrator
Aer
device acvaon, you can add an administrator to manage the parameters.
Before You Start
Acvate the device and select an applicaon mode.
Steps
Note
Tap Skip to skip adding administrator.
1. Enter the administrator's name (oponal) and tap Next.
DS-K1T341B Series Face Recognion Terminal User Manual
24