HIKVISION DS-K1T341B Series

Note
Up to 10 levels of organizaons can be added.
4.
Oponal: Perform the following operaon(s).
Edit Organizaon Hover the mouse on an added organizaon and click to edit its
name.
Delete
Organizaon
Hover the mouse on an added organizaon and click to delete it.
Note
• The lower-level
organizaons will be deleted as well if you delete an
organizaon.
• Make sure there is no person added under the organizaon, or the
organizaon cannot be deleted.
Show Persons in
Sub Organizaon
Check Show Persons in Sub Organizaon and select an organizaon to
show persons in its sub organizaons.
8.4.2 Congure Basic Informaon
You can add person to the client soware one by one and congure the person's basic informaon
such as name, gender, phone number, etc.
Steps
1. Enter Person module.
2. Select an
organizaon in the organizaon list to add the person.
3. Click Add to open the adding person window.
The Person ID will be generated
automacally.
4. Enter the basic informaon including person name, gender, tel, email address, etc.
5. Oponal: Set the eecve period of the person. Once expired, the credenals and access
control
sengs of the person will be invalid and the person will have no authorizaon to access
the doors\oors.
Example
For example, if the person is a visitor, his/her eecve period may be short and temporary.
6.
Conrm to add the person.
-
Click Add to add the person and close the Add Person window.
-
Click Add and New to add the person and
connue to add other persons.
DS-K1T341B Series Face Recognion Terminal User Manual
88