HIKVISION DS-K1T341B Series User Manual

8.4.13 Import Person Pictures
Aer imporng face pictures for the added persons to the client, the persons in the pictures can be
idened by an added face recognion terminal. You can either import person pictures one by
one, or import mulple pictures at a me according to your need.
Before You Start
Be sure to have imported person informaon to the client beforehand.
Steps
1. Enter the Person module.
2. Select an added
organizaon in the list, or click Add in the upper-le corner to add an
organizaon and then select it.
3. Click Import to open the Import panel and check Face.
4.
Oponal: Enable Verify by Device to check whether face recognion device managed in the
client can recognize the face in the photo.
5. Click to select a face picture le.
Note
• The (folder of) face pictures should be in ZIP format.
• Each picture
le should be in JPG format and should be no larger than 200 KB.
• Each picture
le should be named as "Person ID_Name". The Person ID should be the same
with that of the imported person informaon.
6.
Click Import to start imporng.
The imporng progress and result will be displayed.
8.4.14 Export Person
Informaon
You can export the added persons' informaon to local PC as a CSV le.
Before You Start
Make sure you have added persons to an organizaon.
Steps
1. Enter the Person module.
2.
Oponal: Select an organizaon in the list.
Note
All persons' informaon will be exported if you do not select any organizaon.
3. Click Export to open the Export panel and check Person Informaon as the content to export.
4. Check desired items to export.
5. Click Export to save the exported CSV
le in your PC.
DS-K1T341B Series Face Recognion Terminal User Manual
96

HIKVISION DS-K1T341B Series Specifications

General

Brand	HIKVISION
Model	DS-K1T341B Series
Category	Touch terminals
Language	English