HIKVISION DS-K1T341B Series - Set DST; Upgrade and Maintenance

Figure 7-3 Time Sengs
Click Save to save the sengs aer the conguraon.
Time Zone
Select the device located me zone from the drop-down list.
Time Sync.
NTP
You should set the NTP server's IP address, port No., and interval.
Manual
By default, the device me should be synchronized manually. You can set the device me
manually or check Sync. with Computer Time to synchronize the device me with the
computer's me.
7.5.4 Set DST
Steps
1. Click Conguraon → System → System Sengs → DST .
Figure 7-4 DST Page
2. Check Enable DST.
3. Set the DST start me, end me and bias me.
4. Click Save to save the sengs.
7.5.5 Upgrade and Maintenance
Reboot device, restore device parameters, and upgrade device version.
Reboot Device
Click Conguraon → System → Maintenance → Upgrade & Maintenance .
DS-K1T341B Series Face Recognion Terminal User Manual
60