To Next Page

To Previous Page

Edit Linkage

Sengs

Select the congured linkage sengs in the device list and you can edit

its event source parameters, including event source and linkage target.

8.9 Door Control

In Monitoring module, you can view the real-me status of the doors managed by the added

access control device. You can also control the doors such as open/close the door, or remain the

door open/closed via the client remotely. The

real-me access event are displayed in this module.

You can view the access details and person details.

Note

For the user with door control permission, the user can enter the Monitoring module and control

the door. Or the icons used for control will not show. For seng the user permission, refer to

Person Management .

8.9.1 Control Door Status

You can control the status for a single door, including opening door, closing door, remaining the

door open, and remaining the door closed.

Steps

1. Click Monitoring to enter the status monitoring page.

2. Select an access point group on the upper-right corner.

Note

For managing the access point group, refer to Group Management in the user manual of the

client soware.

The doors in the selected access control group will display.

3. Click a door icon to select a door, or press Ctrl and select

mulple doors.

4. Click the following buons to control the door.

Open Door

When the door is locked, unlock it and it will be open for once. Aer the open duraon, the

door will be closed and locked again

automacally.

Close Door

When the door is unlocked, lock it and it will be closed. The person who has the access

authorizaon can access the door with credenals.

Remain Open

The door will be unlocked (no maer closed or open). All the persons can access the door

with no

credenals required.

DS-K1T341B Series Face Recognion Terminal User Manual

128

HIKVISION DS-K1T341B Series User Manual

Questions and Answers: