HIKVISION DS-K1T341B Series - 3.3 Surface Mounting

Figure 3-6 Apply Silicone Sealant on the Side
3.3 Surface
Mounng
Steps
Note
The addional force shall be equal to three mes the weight of the equipment. The equipment ad
its associated mounng means shall remain secure during the installaon. Aer the installaon,
the equipment, including any associated mounng plate, shall not be damaged.
1. According to the datum line on the mounng template, sck the mounng template on the wall
or other surfaces, 1.4 meters higher than the ground.
DS-K1T341B Series Face Recognion Terminal User Manual
7