HIKVISION DS-K1T341B Series - Attendance Statistics

8.11.8 Aendance Stascs
You can check the original aendance record, generate and export the aendance report based on
the calculated
aendance data.
Get an Overview of Employees' Aendance Data
You can search and view the employee's aendance records on the client, including aendance
me, aendance status, check point, etc.
Before You Start
• You should add organizaons and persons in Person module and the persons have swiped cards.
For details, refer to Person Management .
• Calculate the
aendance data.
Note
• The client will
automacally calculate the previous day's aendance data at 1:00 am on the
next day.
• Keep the client running at 1:00 am or it cannot calculate the previous day's aendance data
automacally. If not calculated automacally, you can calculate the aendance data manually.
For details, refer to Manually Calculate
Aendance Data .
Steps
1. Enter the Time & Aendance module.
2. Click
Aendance Stascs → Aendance Record .
3. Set the aendance start me and end me that you want to search.
4. Set other search
condions, including department, name, and person ID.
5. Select data source as Original Records on Device or Manual Handling Records.
6. Oponal: Click Get Events from Device to get the aendance data from the device.
7.
Oponal: Click Reset to reset all the search condions and edit the search condions again.
8. Click Search.
The result displays on the page. You can view the employee's required
aendance status and
check point.
9.
Oponal: Aer searching the result, perform one of the following operaons.
Generate Report
Click Report to generate the aendance report.
Export Report Click Export to export the results to the local PC.
Custom Export For details, refer to .
DS-K1T341B Series Face Recognion Terminal User Manual
153